- Connect applicator to product pack using the draw off tube supplied.
- Set applicator to maximum dose.
- While holding applicator with nozzle pointing vertically upwards, squeeze the handle and release to allow product to enter barrel. (1 squeeze per phase, spray it in between the frame).
- Repeat step 3 until all air is expelled from barrel.
- Rotate selector to desired dose rate in the selector dose window.
Warning: Do NOT squeeze handle while altering dose.
Cleaning instructions:
- Remove the draw off tube from product pack.
- Place end of tube into hot soapy water and flush water through the applicator until product is removed. Flush with clean water.
- Remove barrel from finger bar and soak the o-ring and felt washer on the piston with vegetable oil (DO NOT use mineral oil).
- Reattach barrel to the finger bar and store applicator in a cool dry place.
- Remove the draw off tube from product pack.
Note: Set dose selector to 5ml with single nozzle. The container contains 4 liters of Oxalic Acid